As people are just now breaking through and running the entire Rubicon Trail, some of us are still just getting our Jeeps out of hibernation.
At a recent club meeting, talk turned to the RTF trailer. We all loved that it was available for trail maintenance, but we didn’t like, or use the air of hydraulic system. Most of the time we hand pumped the trailer to dump.
I did a write-up on it years ago when it first came to the Tahoe side…
One of my buddies asked about converting it to electric over hydraulic. I wasn’t opposed to it but it wasn’t mine to make the decision. So, I reached out to ERTF to ask if we could convert it. With RTF off the hook for costs, they said go for it.
Thanks go out to Tim with the Hills Angels 4wd Club of Reno Nevada. Tim did all the fab work on the trailer. Between he and the club they covered the construction costs. For now, I’m on the hook for the cost of the parts.
Superior Hydraulics in Sparks, NV really stepped up and worked with Tim to get the hoses and fittings dialed in: www.superiorhydraulic.net/
So here are the guts. The original hydraulic cylinder was swapped out for something that would work with for us. In hind sight, the original cylinder might be able to be converted to use with the new system. Battery, electric hydraulic pump and reservoir.
A battery was added to run the electric pump. It is charged off the 7-pin connector. If you don’t have a charge on the battery, it will still do a dozen or more dumps before running low. The manual handle is no longer usable. I’m going to add a Battery Tender connection to be able to keep it charged while not in use, or just before it goes out for a day of use.
Protection is always important. Tim had some old (new old stock) Toyota skid plates around and they worked great.
Tim even went so far as to weld rings to protect the mounting bolts.
Tim has always been bothered by the noise of these trailers as they go down the trail. So, he added some rubber padding along the frame rails and a rubber bushing to hold down the bed brace rod so it won’t make noise.
We’re working on getting the official list of parts together, so if RTF wants to convert the other trailers, they have a head start. There are things we’d change if other trailers are converted but overall, we’re happy. The cost should be under $400, maybe even down to $300 if we can reuse the original cylinder.
When it’s all said and done, the trailer is faster, easier and safer to use.
It’s almost as fast fully loaded, but I’m having trouble uploading that video.
Rubicon Ronin – 6/18/19