Reno Off-Road Motorsports Expo 23rd-27th

It’s this week people. March 23rd through Sunday March 27th, Reno Convention Center!

Many local clubs will be there along with Nevada 4wd Association. It’s also a home show, boat show, RV show and pet show, all in one.

Saturday morning there will be a meeting about the Rubicon Trail. It starts at 9am, in room A7. There is no fee to get into the meeting. Please bring all the questions you’ve ever had about the Rubicon Trail.

I set-up early then changed it a bit after I took this photo.

Stop by and say hi.

.

Doug


We came, we saw, we shoveled!

On the morning of March 10th, a few four-wheel drive enthusiasts ventured out to the Rubicon Trail in Tahoma for a day of snow wheeling. Upon their arrival at the trailhead, they discovered a snow and ice wall more than eight feet tall. Not having enough people to tackle the job of breaking through the wall, they left. Thursday:

Saturday morning:

Forty-eight hours later, a larger group of wheelers returned to re-open wheeled access to the Rubicon Trail. Volunteers from four different clubs and three different cities drove to Tahoma to help. We had shovels, pick-axes, digging bars, fresh doughnuts and coffee.

After about an hour and a half of work, we had notched the wall down to something passable by a capable 4×4. The approach is quite steep and the snow, as always, is slick. Our intention was not to make it so easy that any four-wheel drive could get on to the trail. This time of year, travel should only be attempted by a well outfitted rig with an experienced and capable driver. And anyone going out on the trail should be prepared to spend the night with the proper clothing, food and equipment.

More than one local neighbor came over to talk to us while we were working. One said, “you’re ruining it for everyone.” I have to disagree. First off, McKinney Rubicon Springs Road is just that, a road. It is not a private winter park for the local neighborhood. The Rubicon Trail is open year-round for all types of users, including wheeled vehicles. Just because it is not maintained by Placer County during the winter does not mean it is closed.

This individual asked if we couldn’t go somewhere else. To my knowledge, this is the only place in the entire Lake Tahoe Basin where wheeled vehicles are legally allowed to travel over snow. Honestly, I can’t think of anywhere close where we would be allowed. And we have the right to travel on a county road.

Compare that to local areas where individuals can go and cross-country ski, snowshoe, hike, mountain bike, etc. Those places are literally everywhere in the Lake Tahoe Basin; e.g. Blackwood Canyon to the north and Sugar Pine Point State Park to the south. So, we not going to give up our access to the Rubicon Trail.

To address the locals concern over their ability to recreate locally, I would be willing to volunteer my time to help build a non-motorized trail alongside the Rubicon Trail from the residential area to the staging area. This trail could be used for summer and winter travel, reducing the possibility of user conflicts and to provide a better winter experience.

Part of the issue that created the snow and ice wall is how Placer County does snow removal in the area. For almost a decade, local four-wheelers have tried to work with Placer County to address that issue. So far, we have not come to a solution. Another part of the issue is the possibility that someone local is depositing snow illegally at the entrance to the Rubicon Trail. The snow depth at the entrance to the Rubicon Trail is several feet more than that of the rest of the neighborhood. That does not happen naturally.

Many snow stakes were placed at the beginning of this season to better delineate the trail. All but one had been taken down.

After clearing a ramp through the wall, four of the rigs went for a drive up the Rubicon Trail. They didn’t expect to get too far as the report is that the bridge over McKinney Creek still has a large amount of snow piled on it. Driving on a domed pile of snow, over a bridge with no guard rails is not advised.

I want to thank everyone that came out today. Without volunteers, the Rubicon Trail would have been closed decades ago. Our passion for our sport and our willingness to work to preserve it showed today.

Thank you!

.

Doug Barr

.

.

Update: I’m told the bridge wasn’t that bad. Stay on the tracks!

After being open for only two hours, the first stuck rig had to be rescued:

For the record, not one from our group!


“FLASH” Rubicon Trail Maintenance

“Get out your green shovel! Put on your FORT shirts. FOTR is back!”

This is the entrance to the Rubicon Trail as of 9am this morning. Not accessible!

Okay, this is not an official FOTR project, but it should be. I have reached out to FOTR but honestly, I didn’t give them enough time to respond before I posted.

.

Calling all Rubicon users. I am putting together a “flash” Rubicon Trail maintenance effort for this Saturday, March 12th, 9am.

We will be removing the 8-foot snow wall currently blocking wheeled access to the Rubicon Trail. This effort has Placer County approval!

9am    Arrive at trailhead, please do not arrive early.

          Stop your vehicle in the street as if you’re waiting to drive up the Rubicon.

          Do not “park” along the side of the road, parking is illegal this time of year.

9:15   Safety and Operational Briefing

9:30   Start snow removal

The goal is to reduce the wall to a ramp

All snow will remain on McKinney Rubicon Road

No snow will be moved on to Evergreen Street

If the wall does not give in easily, we will try using chainsaws to get through the ice.

Please bring: Shovels, Pick Axes, Digging Bars, Food & Drink for yourself, Gloves, Waterproof Pants, Sunglasses, etc.

Snowblowers are not allowed at this time.

I just got the word that no mechanized equipment may be used to remove snow from the entrance of the Rubicon. So, chainsaws are out.

Here’s the challenge. Who’s got a bigger saw than I do? Mine’s got a 36″ cutting edge!

I will supply doughnuts and some drinks for hydration.

No idea how many people will show up.

.

Rubicon Ronin


Rubicon Trail Meeting in Reno – update

The Reno Off-Road and Motorsports Expo is happing March 23-27 at the convention center. On Saturday the 26th, there will be a meeting at 9am about everything Rubicon. Attending the meeting is free. El Dorado County is heading up the meeting. Below is a list of all of the groups and agencies that have been invited to the meeting. I do not know who has accepted the invitation or who has declined.

Questions to be asked: What maintenance is planned for the trail in 2022? Will there be an Adopt-a-Trail program for the Tahoe side? When will the staging area bathrooms open/close? Where are we with the small mud hole bypass? Where are we with the suggested larger shelf road bypass? How are parking issues at the staging area going to be solved? Can we stop or prevent future trail closures for fires well away from the trail? How do we volunteer to do trail maintenance on the Tahoe side?

That’s not my entire list of questions. If you have a specific question to ask and can’t make the meeting, let me know and I’ll add it to my list.

.

El Dorado County Parks & Trails

Tahoe National Forest, Truckee Ranger District

Lake Tahoe Basin Management Unit

Eldorado National Forest

Placer County (ask for Peter Kraatz)

CA State Parks OHMVR Division

Rubicon Trail Foundation (RTF)

Friends of the Rubicon (FOTR)

CA Off-Road Vehicle Association (CORVA)

CA Four Wheel Drive Association (Cal-4)

NV Four Wheel Drive Association (NV-4)

Local clubs:

  • Hills Angels (Reno/Sparks)
  • Lake Tahoe Hi-Lo’s (Tahoe)
  • Tahoe Donner 4-Wheelers (Truckee)
  • Sierra Stompers (Minden/Gardnerville)

.

I’ll be hanging out at my booth at the Expo all week. Stop by and let me know what’s on your mind.

.

Rubicon Ronin


Trailer hubs updated

So, having bought a TJ many years ago, as my go to trail rig; then selling the old trail ready CJ just a few years ago; then getting my project CJ ready for sale, last week. It was time to update the Jeep trailer from 5 on 5.5 hubs/rims to 5 on 4.5 to match the TJ.

Here’s the trailer behind the old trail rig CJ7, pictured at the Miller Lake campsite. All wheels 5 on 5.5.

I found an old trailer axle on Craigslist that was 5 on 4.5. the plan was to cut it, narrow it to fit and even do a portal type design to get more clearance. That didn’t quite work out.

So, the next step was to get the 5 on 4.5 hubs on the existing trailer axle. Below: old 5 on 5.5, spindle from Craigslist axle, 5 on 4.5 Craigslist hub.

But the spindles are different:

No problem. Swap out with different bearings to fit the different spindle. I bought new bearings and went to take about the 5 on 4.5 hubs to insert the new bearings. They didn’t want to come apart and upon a closer inspection, I realized the two hubs were different!

Bite the bullet, buy brand new hubs, bearing kit and get it done. And it is done and ready for trail maintenance or all the girlfriend’s camping gear.

I now have tires/wheels on my trailer that match in size to those on my Jeep. Worse-case scenario, I take a wheel off the trailer and leave the trailer on the side of the trail. Yes, I carry a full-size spare, as shown, while on the trail.

The wheel is shifted back in the fender a little bit. (The CJ in the back just got sold. It’s being picked up today.)

The next step is to place a plate on the spring perch to shift the wheel forward and inch. Something like this one but much narrower to match the spring pack.

But that can wait until next month.

.

Rubicon Ronin

.

Rather than start a new post, I’ll add the update here.

Here are the spring relocation plates I’ll use on the trailer. I made these. The two different holes allow for a 3/4″ or a 1″ shift. I went with the full 1″ shift.

Here’s a before picture. When I got the trailer, I needed more room for the 33″ tires, so I did a spring over lift. Driver’s side pictured. This is not the original axle. That one was destroyed on an FOTR Rubicon Trail maintenance effort, not by me, I had loaned it out to a good friend. Yes, we’re still good friends.

Here’s where is goes. Passenger side.

Here it is back together.

The curve in the plate was to match a normal leaf spring curve. With this odd set-up of a spring over with no spring perch, it went in upside down. but it works.

The wheel is now much more centered in the opening. Not a big deal but it looks better.

.

Rubicon Ronin